Operation
2.7.2 Refusing Incoming Calls (Do Not Disturb [DND])
You may set this feature during a meeting or when
you are busy.
To set/cancel
PT / SLT
Off-hook.
T7436 / T7235
Off-hook.
•
A flashing CO button tells you an outside call is received. You can answer the call by
pressing the flashing CO button.
•
While setting, you can temporarily cancel this feature by pressing the FWD/DND button.
Pressing the FWD/DND button alternates between setting or cancelling the mode.
•
You can set the "Do Not Disturb" and "Call Forwarding" features at the same time. However,
only one feature will work at a time. You can change the feature by pressing the FWD/DND
button while on-hook. Pressing the FWD/DND button changes the feature as follows:
DND
110
FWD/DND
OR
7
1
Press FWD/DND
or dial 710.
FWD/DND
Press FWD/DND.
FWD
OFF
1
OR
0
0
Dial 1 to set
or 0 to cancel.
Cancel
FWD/DND Cancel
Do Not Disturb
Set
Press "FWD/DND Cancel" to
cancel or "Do Not Disturb" to set.
Set
Cancel
C.Tone
On-hook.
C.Tone
On-hook.
User Manual