PREPARATION
STAND INSTALLATION
Only 50PS70 **
■
Image shown may differ from your TV.
■
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the
product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt
can deviate from abrasion of the tightening part of the bolt.
1
Carefully place the TV screen side down on a cushioned
surface to protect the screen from damage.
2
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in the
3
back of the TV.
Front
6
When assembling the stand, make sure to distinguish and assemble the front
and rear side of the stand correctly.