Download  Print this page

To Originate A Call Using Speed Calling - NEC Series E User Manual

Agent console dterm
Hide thumbs

Advertisement

TO ORIGINATE A CALL
USING SPEED CALLING
(ONE-TOUCH KEYS)
NON-ACD LINE
Press
SPEED CALL
Press desired
SPEED CALL.
and
T
P
O
ROGRAM
term
(Available only on D
calling keys).
FEATURE
Press
key.
SPEED CALL
Press desired
Enter desired
telephone number
or feature code on
the keypad. Display
indicates digits dialed.
key.
SPKR
key, or press
stations with speed
key.
SPD SET
(Time display)
T
V
O
ERIFY
FEATURE
Press
key.
SPEED CALL
Press desired
Display indicates digits programmed.
NOTE 1: To program a hookswitch for transfer or
feature activation, press
("!" displays on LCD).
NOTE 2: To program a pause, press
any digit other than the first ("-" displays on LCD).
NOTE 3: To program a Voice Call press
key after dialing station number ("V" displays on LCD).
NOTE 4: Speed calling for feature access: Speed
call keys may be used as feature keys by storing the
NEAX2400 feature access codes. The feature may be
programmed on a system basis by the PBX engineer.
Access codes may be stored in conjunction with
telephone numbers. For example, one button can
be programmed by the user to transfer to a cetain
extension.
28
key.
RELEASE
key as first digit
RELEASE
key as
TRANSFER

Advertisement

Table of Contents
loading

  Related Manuals for NEC Series E

  Related Content for NEC Series E

This manual is also suitable for:

Dterm e series