Pioneer DRM-7000 Operating Instructions Manual page 33

Run-statistics
The run statistics information may be retrieved to display the
amount of time or the number of times operations have been
performed.
Move the cursor to either "Work-time sum" or "Number of
moves" and press the ENT key to browse the corresponding
data.
¶ Work-time sum
"PowerOn-time" may be selected in order to display the
total amount of time the power has been turned on.
Press the ENT key
"Drive work-time" may be selected to display the total
amount of time each drive within the changer has been in
operation.
Press the ENT key
Press » key
Press » key
Note that the data indicating the total amount of time
displayed under "Drive work-time" is maintained
individually for each unique device ID, and that for this
reason always the correct value is displayed even if a drive
is reinserted into a different bay within the changer.
≠
≠
≠
≠
¶ Number of moves
The « and » keys may be pressed to display the number
of any of the following four operations which have been
performed.
Elevation done:
This item may be selected to indicate the number of times
the elevation mechanism has been operated. Note that
this information is useful as a means of determining when
the elevation mechanism needs to be serviced or
maintained.
Load/Unload done:
This item may be selected to indicate the number of times
the loading mechanism has been operated in order to load
or unload a disc into a slot or a drive. When a disc is moved
from a slot to a drive, the number of load/unload operations
is normally counted as two. Note that this information is
useful as a means of determining when the loading
mechanism needs to be serviced or maintained.
Mailslot driven:
This item may be selected to indicate the number of times
a mailslot has been used. Note that an open-and-close
operation is counted as one time.
Hyper driven:
This item may be selected to indicate the number of times
a hyper magazine has been ejected or inserted. Note that
an eject-and-insert operation is counted as one time.
Press « key
≠
Press « key
≠
Press « key
≠
Operation
Press » key
±
Press » key
±
Press » key
±
33
<DRC1184>
En