Disconnecting A Cellular Phone; Registering A Connected Cellular Phone; Deleting A Registered Phone - Pioneer DEH-P6000UB Operation Manual

Section
06 Available accessories
3 Press MULTI-CONTROL to open the con-
nection.
Always waiting flashes and the unit is now
on standby for connection from a cellular
phone.
4 Use cellular phone to connect to this
unit.
# The link code is set to 0000 as default. You
can change this code in the initial setting. Refer
to Entering PIN code for Bluetooth wireless con-
nection on page 33.

Disconnecting a cellular phone

1 Display the function menu.
Refer to Function and operation on page 42.
2 Use MULTI-CONTROL to select
Disconect phone in the function menu.
Device name of the connected phone appears
in the display.
3 Press MULTI-CONTROL to disconnect a
cellular phone from this unit.
After disconnection is completed,
Disconnected is displayed.
Registering a connected
cellular phone
1 Display the function menu.
Refer to Function and operation on page 42.
2 Use MULTI-CONTROL to select
Set phone in the function menu.
3 Push MULTI-CONTROL up or down to
select a registration assignment.
P1 (user phone 1)—P2 (user phone 2)—P3
(user phone 3)—G1 (guest phone 1)—G2
(guest phone 2)
# As you select each assignment, you can see
whether or not a phone is already registered. If
the assignment is empty, No data is displayed. If
the assignment is already taken, the device name
appears. To replace an assignment with a new
phone, first delete the current assignment. For
44
En
more detailed instructions, see Deleting a regis-
tered phone on this page.
4 Press MULTI-CONTROL to register the
currently connected phone.
When registration is completed,
Reg.Completed is displayed.
# If the registration fails, Reg.ERROR is dis-
played. In this case, return to step 1 and try
again.

Deleting a registered phone

1 Display the function menu.
Refer to Function and operation on page 42.
2 Use MULTI-CONTROL to select
Delete phone in the function menu.
3 Push MULTI-CONTROL up or down to
select a registration assignment.
P1 (user phone 1)—P2 (user phone 2)—P3
(user phone 3)—G1 (guest phone 1)—G2
(guest phone 2)
# If the assignment is empty, No data is dis-
played and operation is not possible.
4 Push MULTI-CONTROL right to select
Delete YES.
Delete YES is displayed. Deleting phone is
now on standby.
5 Press MULTI-CONTROL to delete the
phone.
After the phone is deleted, Deleted is dis-
played.