Table of Contents
Advertisement
11. Notes to users
Power supply
Co
nnect a 12V DC voltage (11 to 13V) from an external regulated DC power su
Us
e a stable power supply without ripple and nois
Pr
ior to turning on the power switch , check that the polarities of the p
referring to the connection diagram
To protect CCD (sensor)
Do not touch the glass surface of the CCD sensor to avoid det
and s
cratches.
If the glass surface of the sensor should become dusty or dirty , remove dust or di
cotton-tipped applicator. Do not wipe the surface with dry clo
damage to the glass surface by static electricity.
Protection of camera
Do not use or store the camera under direct sunlight , at a place exposed to rain or snow , or at a
place where flammable or corrosive gas is present.
When housing the camera in a camera case , use the utmost care regarding rise of internal
temperature.
W
hen casing the camera , the temperature normally rises by 10 to 20
temperature. The camera operates in the temperature range from -5 to 45 . If the camera is used
or left in high temperature environment for hours , the life of the camera may be shortened.
Do not drop the camera. Do not apply strong shock or vibration to the camera.
Before connecting or disconnecting a connector , turn off the camera and be sure to hold connector
body to connect or disconnect the connector.
Camera arrangement
Mutual interference noise can occur if multiple cameras are arranged in close proximity. Separate
the cameras to the extent possible.
When camera units
picture. In such cases , shield the camera units.
The camera can be damaged by static electricity. Use
Auto electric shutter
In
regions using 50 Hz power line frequency , flicker can appear on the monitor screen from light
sources such as fluoresce
are installed directly into other equipment , external noise can prevent a normal
nt or mercury. In such cases , release the auto electronic shutter.
e.
eriorati
on in picture q
th or pa
, compared with the outside air
ample care when installing and arranging.
pply.
ower cable are correct ,
uality due to dirt
rt carefu
lly with a
per tissue to avoid possible
Advertisement
Table of Contents
