Description of Remote Control
Plug the fireplace into a power outlet. The fireplace is now in Standby mode.
button once to turn on the fireplace and flame effect. An indicator light will light up
to indicate that the function is on. This will also turn on the flame effect.
button once to turn off the flame effect. This will put the fireplace back into
Press the "Heat Control" button once for the low heat setting. Ten seconds later, the fireplace
will begin to dispense warm air (750W).
Press the "Heat Control" button again to have the fireplace dispense hot air (1500W).
Press the "Heat Control" button again, and after ten seconds the heat will turn off.
Press either the 〝+〞or 〝-〞button to brighten or dim the flames.
Press the "Timer" button to set the fireplace to turn off after certain duration of time. Timer
duration ranges from 0.5hrs to 7.5hrs. The LED indicator lights up when the fireplace is in Timer
Note: All of the above functions can be operated by either the Control Panel or the Remote Control.