Cycle Options; Cycle Settings - Electrolux 115 V 60 Hz Washer Owner's Manual

Table of Contents

Advertisement

Cycle Settings

WASH-SPIN SPEED/SPEED COMBINATIONS (on select models)
Select the agitation and spin speed combination suitable
for each load. The following chart suggests wash/spin
speeds for typical wash loads.
Fabric Type
Regular/Whites
Perm Press/Colors
Knits
Delicates / Hand washables
Washable woolens
WATER LEVEL/LOAD SIZE
Turn the
Load Size knob to select a water level
appropriate for the load size. For best results, DO NOT
overload. Add items loosely to the tub. The dry load
should not be higher than the top of the agitator vanes.
There should be enough water in the tub for items to
move freely.
To increase the water level after the wash cycle begins, turn
the Load Size knob to Reset and hold. When water begins
to enter the tub, turn the knob to the desired setting.
WASH/RINSE TEMPERATURE
Turn the
Wash/Rinse Temp knob to select the wash
water temperature suitable for the fi ber content and soil
level of each load. A cold water rinse saves energy and
reduces wrinkling.
If a cold rinse is selected, the washer will fi ll with cold
water during rinse. If a warm rinse is selected, the washer
will fi ll with warm water during rinse.
The following chart suggests wash/rinse temperatures for
basic fabric types.
Fabric Type
Heavily soiled white/colorfast cotton,
perm press
Normally soiled white/colorfast cotton,
perm press
Lightly soiled cottons and perm press,
noncolorfast fabrics, knits, delicates, hand
washables
Washable woolens

Cycle Options

EXTRA RINSE (on select models)
Select Extra Rinse to automatically add an additional deep
rinse to the Regular/Whites cycle. It provides 3 minutes of
rinse agitation at the selected rinse water temperature. If
desired, add liquid fabric softener to this rinse (not the fabric
Wash/Spin
softener dispenser) or use a softener sheet in the dryer. DO
Speeds
NOT pour fabric softener directly onto the load.
Normal/Fast
Normal/Slow
Gentle/Slow
Gentle/Slow
Energy Saving Tips
Gentle/Slow
Wash full loads. Oversize loads use extra energy. Undersized
loads waste energy.
When small wash loads cannot be avoided, use lower
water levels.
Select the appropriate cycle and time for each load.
Shorten wash times for lightly soiled loads.
To reduce drying time, select a fast spin speed to remove
more water from heavy items such as towels and jeans.
Use warm water to wash most loads. Limit hot water
washes to heavily soiled and white loads. Use cold water
for lightly soiled items and rinsing.
Operate the washer in early morning and late evening
when utility demands are low.
Follow proper laundry procedures to avoid rewashing.
Wash/Rinse
Temperature
Hot/Cold
Warm/Cold
Cold/Cold
Warm/Warm
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents