If the cold water is warm:
• This is due to either a compressor malfunction (for units with compressor) or
the cold water switch may be in the OFF position.
• Check if the cold water button is in the On position.
• Cold water is used very frequently.
If water leaks from the tap:
• A calcium deposit may have formed in the tap. Wash the inside of the water
dispenser with CLR.
If water is dripping from the dispenser onto the floor:
• The water bottle may have small pinholes.
• The drain plug in the rear may be improperly fastened. Check that the soft
rubber seal is not torn or damaged.
• The drip tray at the bottom of the cooling compartment may be full of water.
Take
out the drip tray and empty it before replacing it.
English
10