Cancel Mob Navigation (Only When Mob Navigation Is Activated); Remove Target (Only If Target Is Active) - Humminbird 757c Operation Manual

531528-1_A - 757c_787c2_&_787c2i_Man_Eng.qxp
Cancel MOB Navigation removes the Man Overboard (MOB) waypoint and
exits Man Overboard mode. This menu choice will only appear when you are
currently navigating in Man Overboard mode.
To Cancel MOB Navigation:
1. Highlight Cancel MOB Navigation on the Navigation X-Press™ menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate canceling MOB
navigation.
3. The Confirm dialog box will appear. To cancel MOB navigation, press
the RIGHT Cursor key once more. To avoid canceling MOB navigation,
press the LEFT Cursor key.
Remove Target removes the waypoint target from the display. This menu choice
will only appear when a target has already been applied to a waypoint.
NOTE: See Add a Waypoint Target or Trolling Grid for more information.
To Remove a Target:
1. Highlight Remove Target on the Navigation X-Press™ menu.
2. Use the RIGHT 4-WAY Cursor Control key to remove the target.
Cancel MOB Navigation
(only when MOB Navigation is activated)
Remove Target
(only if a Target is Active)
75
10/16/2006 10:43 AM Page 84