Hardware Installation; Physical Installation - Planet ICA-HM315W User Manual

Or

2.3 Hardware Installation

2.3.1 Physical Installation

1. Connect an Ethernet cable
Connect the LAN cable on the camera to the network device (hub or switch).
2. Attach the power supply
Plug in power adapter and connect to power source. After power on, the camera will start to
operate.
NOTE: 1. Only use the power adapter supplied with Internet camera Otherwise, the
product may be damaged.
2. The product may be damaged when Internet camera is connected to a PoE
switch and power adapter simultaneously.
3. Attach BNC connector (option)
Connect the video BNC connector to a monitor set if necessary check camera viewing angle and
focus.
4. Attach Speaker to camera (option)
If user needs not only video stream but also audio stream, then the speaker should be attached to
camera.
10