Dimplex MILANOef EDS7001F Parts And Service Manual

Dimplex milano stove parts and service manual
Hide thumbs Also See for MILANOef EDS7001F:

Advertisement

PARTS AND SERVICE MANUAL
ef
FOR THE MILANO
STOVE
MODEL NUMBER:
EDS7001F

Advertisement

Table of Contents
loading

Summary of Contents for Dimplex MILANOef EDS7001F

  • Page 1 PARTS AND SERVICE MANUAL FOR THE MILANO STOVE MODEL NUMBER: EDS7001F...
  • Page 2 TABLE OF CONTENTS OPERATION PAGE 1 PARTS DRAWING PAGE 3 PARTS LIST PAGE 4 WIRING DIAGRAM PAGE 5 UPPER LIGHT BULB REPLACEMENT PAGE 6 LOWER LIGHT BULB REPLACEMENT PAGE 7 MAIN ON/OFF SWITCH REPLACEMENT PAGE 8 FLAME MOTOR/FLAME ROD REPLACEMENT PAGE 9 HEATER ON/OFF SWITCH REPLACEMENT PAGE 11...
  • Page 3: Operation

    EDS7001F OPERATION To access the controls go to the back of the stove. A. MAIN ON/OFF SWITCH The On/Off switch supplies power to all unit functions (heat/flame) B. HEATER ON/OFF SWITCH The HEATER ON/OFF SWITCH supplies power to the heater fan and the heater element.
  • Page 4: Optional Remote Control

    EDS7001F OPTIONAL REMOTE CONTROL The remote control has a range of approximately 50ft. (15.25m) it does not have to be pointed at the fireplace and can pass through most obstacles (including walls). It is supplied with one of 243 independent frequencies to prevent interference with other units.
  • Page 5 EDS7001F...
  • Page 6: Replacement Parts

    EDS7001F REPLACEMENT PARTS STOVE- MILANO STYLE - GLOSS BLACK PART NO. 6900830100 6900830100 MOD LEVEL NONE REPLACEMENT PART REPLACEMENT PART NO. 1. LOG SET 0438270100RP 0438270100RP 2. FRONT DOOR 0438390100RP 0438390100RP 3. TOP PANEL 1103740104RP 1103740104RP 4. MOTOR, ELECTRIC 2000140300RP 2000140300RP 5.
  • Page 7: Wiring Diagram

    EDS7001F WIRING DIAGRAM...
  • Page 8 EDS7001F If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
  • Page 9 EDS7001F If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
  • Page 10 EDS7001F If unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
  • Page 11 EDS7001F If the unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
  • Page 12: To Replace Flame Motor/Flame Rod

    EDS7001F If the unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
  • Page 13 EDS7001F If the unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
  • Page 14 EDS7001F If the unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
  • Page 15 EDS7001F If the unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
  • Page 16 EDS7001F If the unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
  • Page 17 EDS7001F If the unit was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.

Table of Contents