Switches and Sensors
Fuel Reserve Switch Inspection (2)
Fuel Pump (see Fuel System (DFI) chapter)
Connect the test light (12 V 3.4 W bulb in a socket with
leads) and the 12 V battery to the fuel pump connector as
12 V Battery [A]
Test Light [B]
Fuel Pump Connector [C]
Fuel Reserve Switch [D]
If the test light doesn't light, replace the fuel pump.
It may take a long time to turn on the test light in case
that the fuel reserve switch is inspected just after the
fuel pump is removed. Leave the fuel reserve switch
with leads for inspection connected for one (1) minute.
ELECTRICAL SYSTEM 16-73