Front Fender Removal
Brake Hose Clamps [A] (Left and Right)
Bolts [B] (Left and Right)
Remove the front fender [C].
Front Fender Installation
Install the front fender to the front fork.
Torque - Front Fender Mounting Bolts: 3.9 N·m (0.40 kgf·m,
Install the brake hose clamps to the front fender holes.
Flap and Rear Fender Rear Removal
Seats (see Rear/Front Seat Removal)
Seat Cover (see Seat Cover Removal)
Storage Box (see Storage Box Removal)
Rear Turn Signal Light Lead Connectors [A] (Left and
License Light Lead Connector [B]
Tail/Brake Light Lead Connector [C]
Allen Bolts [D]
Seat Lock Bolts [F]
Remove the rivet screws [A] to take off the brackets [B]
and flap [C] assembled the rear turn signals and license
Pull out the rear fender rear [D] assembled tail/brake light
Flap and Rear Fender Rear Installation
Insert the projection of rear fender rear under the rear
Install the front part of the flap under the rear fender rear.
Install the harness clamp in accordance with Harness
Routing section in Appendix chapter.