Cylinder Head Cover
Be sure to install the pins [A] and rubber gaskets [B].
Install the chain guide [A].
Install the washer [B] with the metal side faces upward.
Torque - Cylinder Head Cover Bolts: 9.8 N·m (1.0 kgf·m, 87
Install the rubber plate so that left side [A] of it into be-
tween radiator fan and cylinder head cover, and light side
[B] of it onto the cylinder head cover.
Route the radiator fan harness, fan switch lead wire and
camshaft position sensor lead wire in accordance with
Harness Routing section in Appendix chapter.
Install the air suction valve and air suction valve covers.
Do not forget to install the engine ground lead on the
back side bolt of right side air suction valve cover.
Torque - Air Suction Valve Cover Bolts: 12 N·m (1.2 kgf·m,
Vacuum Switch Valve and Hoses
Fuel Tank, Air Cleaner Housing and Throttle Body As-
ENGINE TOP END 5-13