Free Play Inspection
Push the choke lever [A] all the way to the front.
Check choke cable free paly [B].
Determine the amount of choke cable play at the choke
lever. Pull the choke lever till just before the inner cable
[C] moves the link lever [D]; the amount of choke lever
travel is the amount of cable play.
If the free play is incorrect, adjust the choke cable.
Choke Cable Free Play
2 ∼ 3 mm (0.08 ∼ 0.12 in)
Free Play Adjustment
Loosen the locknut [A], and turn the adjuster [B] until the
cable has the proper amount of free play.
Tighten the locknut securely.
Choke Cable Installation
Install the choke cable in accordance with the Cable Rout-
ing section in the General Information chapter.
After installation, adjust the cable properly.
Operation with an incorrectly routed or improperly
adjusted cable could result in an unsafe riding con-
Refer to the General Lubrication Perform in the Periodic
FUEL SYSTEM (DFI) 3-101