3-52 FUEL SYSTEM (DFI)
Fuel Pump Relay
Fuel Pump Relay Removal
Never drop the relay, especially on a hard surface.
Such a shock to the relay can damage it.
Seats (see Frame chapter)
Remove the fuel pump relay [A] from the bracket and dis-
connect the connector.
Fuel Pump Relay Inspection
Remove the fuel pump relay (see above).
Connect the hand tester [A] and one 12 V battery [B] to
the relay connector [C] as shown.
Special Tool - Hand Tester: 57001–1394
Relay Coil Terminals  and 
Relay Switch Terminals  and 
1 Ω range
When battery is connected → 0 Ω
When battery is disconnected → ∞ Ω
If the relay does not work as specified, replace the relay.