Turning The Heater On - Mitsubishi Electric Jet Towel JT-MC106G-W-NA Instruction Manual

Turning the heater on

1
Open the front cover.
Refer to "How to open/close the front cover" on page 4.
2
Press the heater switch or the sensor switch
and let the settings light turn on.
3
Turn the heater switch "ON".
The heater may not operate during continued use as there is
the danger of scalding when the temperature of the warm air
rises.
The air may not feel warm when the room temperature is low
(68 F (20 C) or below).
Checking the settings
The heater light and sensor light turn off after about
10 seconds after their settings are made (to save energy).
To check the settings, press either the heater or sensor
switch.
Simple heater
Softens the feeling of cold air.
If the room temperature is above 80 F (30 C), the heater will stop working to prevent the temperature from rising
too high.
If the room temperature is less than 64 F (18 C), the air may feel cold.
NOTE
Front cover
NA 6
Open
Heater switch
Heater
light
Heater
switch