Settings; General - Nokia N95 User Manual

Settings

To change settings, press
Scroll to General, Phone, Connection, or Applications,
and press . Scroll to a setting or setting group you want
to change, and press
Some settings may be preset for the device by your service
provider, and you may not be able to change them.

General

To edit the general settings of your device or restore the
original default device settings, press
Settings > General
Enhancement, Security,
For Date and time, see "Clock," p. 80.
Personalization
To edit settings related to the display, standby mode, and
general functionality of your device, press
Tools > Settings >
Tones allows you to change the tones of calendar, clock,
and the currently active profile.
Themes opens the
look of your device," p. 78.
Voice comms. opens the settings for the
application. See "Voice commands," p. 107.
108
, and select Tools
.
, and select
> Personalization, Date and
Factory settings, or Positioning.
, and select
General > Personalization.
Themes application. See "Change the
Voice comm.
> Settings. Display
Light sensor—Press
that observes the lighting conditions and adjusts the
brightness of the display. The light sensor may cause the
display to flicker in low light.
Font size—Adjust the size of the text and icons on
the display.
Power saver
which the power saver is activated.
Tools >
Welcome note /
time,
briefly each time you switch on the device. Select
to use the default image,
Image to select an image from Gallery.
Light time-out—Select a time-out after which the backlight
of the display is switched off.
Standby mode
Active standby—Use shortcuts to applications in the
standby mode. See "Active standby mode," p. 79.
Active standby
you want to appear in the active standby. This setting is
only available if
Shortcuts >
Assign a shortcut to the selection keys in the standby mode.
or to adjust the light sensor
time-out—Select the time-out period after
logo—The welcome note or logo is displayed
Text to write a welcome note, or
apps.—Select the application shortcuts
Active standby is on.
Left selection key and Right selection
Default
key—