Microprocessor Control; Wireless Remote Controller - Mitsubishi Electric MSZ-GC22VA Service Manual

9

MICROPROCESSOR CONTROL

MSZ-GC22VA
MSZ-GC25VA
MSZ-GC35VA

WIRELESS REMOTE CONTROLLER

Signal transmitting section
Operation display section
OPERATE/STOP
(ON/OFF) button
Open the front lid.
Once the operation mode is set, the same operation mode can be repeated by simply turning OPERATE/STOP
(ON/OFF) button ON.
Indoor unit receives the signal with a beep tone.
When the system turns off, 3-minute time delay will operate to protect system from overload and compressor will not
restart for 3 minutes.
INDOOR UNIT DISPLAY SECTION
Operation Indicator lamp
The operation indicator at the right side of the indoor unit indicates the operation state.
•The following indication applies regardless of shape of the indicator.
Indication
The unit is operating
to reach the set
temperature
The room temperature
is approaching
the set temperature
Standby mode
(only during multi
system operation)
FAN SPEED CONTROL button
OPERATION SELECT button
Temperature buttons
Operation state Room temperature
About 2 : or more
away from
set temperature
About 1 to 2 : from
set temperature
ECONO COOL button
RESET button
Indication of
remote controller
model is on back
9
OFF TIMER button
ON TIMER button
TIME SET buttons
FORWARD button
BACKWARD button
CLOCK SET button
VANE CONTROL button
Lighted
Blinking
Not lighted