Messages - Sony CMT-HX7BT Operating Instructions Manual

Micro hi-fi component system
Hide thumbs Also See for CMT-HX7BT:
Table of Contents

Advertisement

Messages
CD/MP3 player, Tuner
Complete!: The preset operation ended
normally.
Invalid: You pressed an invalid button.
LOCKED: The disc tray does not open.
Contact your nearest Sony dealer.
No Disc: There is no disc in the system)
or you have loaded a disc that cannot
be played.
No Step: All of the programmed tracks
or files have been erased.
Over: You have reached the end of the
disc while pressing
~
lHl
during
playback or pause.
Push SELECT!: You tried to set the clock
or timer during timer operation.
Push STOP!: You pressed PLAY MODE
~
during playback.
Reading: The system is reading
information of the disc. Some buttons
are not available.
SET CLOCK!: You tried to select the timer
when the clock is not set.
SET TIMER!: You tried to select the timer
when the Play Timer is not set.
Step Full!: You tried to program more
than
26
tracks or files (steps).
TIME NG!: The Play Timer start and end
times are set to the same time.
XM
ANTENNA: The XM Mini-Tuner and
Home Dock are not connected. Check
all the connections) and then turn the
system on again.
CH - - -: You have entered an invalid
channel number. The channel to be
tuned-in is void due to the change by
the broadcast service) or the receiving
condition is not good.
LOADING: The system have not finished
receiving the entire audio data or text
information. Some buttons are not
available.
NO SIGNAL: The receiving condition
is not good. Try moving the antenna
to another location. Make sure the
antenna points south. For details
about the antenna location) see the
instructions supplied with the XM
Mini-Tuner and Home Dock.
OFF AIR: The channel is not broadcasted
now.
UPDATING: You have not subscribed for
XM or the channel is not authorized.
You need to subscribe for XM.
- - - - - -: There is no text information
or time information in the channel.
This is not an error. The text
information may not be displayed
depending on the system condition)
for example) right after the system has
received a channel.
SIRIUS
ANTENNA: The antenna is not connected
properly. Check the connection
between the SiriusConnect Home
tuner and the antenna.
Acquiring: The receiving condition is
not good. Try moving the antenna to
another location. For details about the
antenna location) see the instructions
supplied with the SiriusConnect Home
tuner.
Call 888-539-SIRI: You have not
subscribed for the selected channel.
CHK SIRIUS: The SiriusConnect Home
tuner is not connected properly.
Check all the connections) and then
turn the system on again. Also make
sure if the AC adaptor supplied with
the SiriusConnect Home tuner is
connected to a wall socket.

Advertisement

Table of Contents
loading

Table of Contents