Cleaning Instructions - Panasonic CS-ME7QKUA Operating Instructions Manual

Cleaning instructions

To ensure optimal performance of the unit,
cleaning has to be carried out at regular
intervals. A dirty unit may cause malfunction
and you may see error code "H99". Please
consult authorized dealer.
• Switch off the power at the circuit breaker before
cleaning.
• Do not touch the aluminium fi n, sharp parts may
cause injury.
• Do not use benzene, thinner or scouring powder.
• Use only soap (
detergent.
• Do not use water hotter than 104°F / 40°C.
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Front panel
Wash gently and dry.
Remove the front panel
Pull out
2
1 Raise
Close it securely
2 Close down
3 Press both ends of the front panel
8
pH 7) or neutral household
1 Insert at both sides
Indoor unit
Aluminium fi n
Front panel
Air fi lters
Air fi lters
Every 2 weeks
• Wash/rinse the fi lters gently
with water to avoid damage to
the fi lter surface.
• Dry the fi lters thoroughly under shade, away
from fi re or direct sunlight.
• Replace any damaged fi lters.
Remove air fi lter
Air purifying fi lter
Vacuum the air purifying fi lter.
• It is recommended to clean the fi lter every 6
months.
• Replace the fi lter every 3 years or replace any
damaged fi lter.
• Part no.: CZ-SA20P
For seasonal inspection after extended
non-use
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• Use Auto OFF/ON button to select COOL/
HEAT operation. After 15 minutes of operation,
it is normal to have the following temperature
difference between air inlet and air outlet
vents:
COOL: ≥ 14.4°F/8°C
For extended non-use
• Activate HEAT mode for 2~3 hours to remove
moisture left in the internal parts thoroughly to
prevent mould growth.
• Turn off the power supply.
• Remove the remote control batteries.
Air purifying fi lter
Attach air fi lter
Insert into the unit
HEAT: ≥ 25.2°F/14°C