Brake Lever, Brake Pedal
Brake Lever Play Adjustment
Refer to the Brake Lever Play Adjustment in the Periodic
Brake Pedal Position/Pedal Play Adjustment
Refer to Brake Pedal Position/Pedal Play Adjustment in
the Periodic Maintenance chapter.
Brake Pedal Removal
Remove the mounting bolt [A] and take off the brake pedal
[B] and return spring.
Cotter Pin [C]
Joint Pin [D]
Brake Pedal Installation
Install the joint pin, washer and a new cotter pin.
Bend the ends [A] of the cotter pin.
Apply a non-permanent locking agent to the pedal mount-
Install the return spring direction [A] as shown.
Torque - Brake Pedal Mounting Bolt: 25 N·m (2.5 kgf·m, 18
Replace O-rings [A] with new one.
Apply high temperature grease to the O-rings and shaft
portion of the mounting bolt.
Apply a non-premanent locking agent to the thread of the
brake pedal mounting bolt.
Install the brake pedal [B].
Install the washer [C] inside the pedal.
Check the brake pedal position.