Download  Print this page

Set Up Easylink (hdmi-cec Control) - Philips HTB3525B User Manual

Blu-ray surround base.
Hide thumbs

Advertisement

The digital optical connector might be
labeled SPDIF or SPDIF OUT.
Option 2: Connect audio through a
digital coaxial cable
Good quality audio
1
Using a coaxial cable, connect the
COAXIAL IN connector on your Blu-
ray Surround Base to the COAXIAL/
DIGITAL OUT connector on the TV or
other device.
The digital coaxial connector might be
labeled DIGITAL AUDIO OUT.
Option 3: Connect audio through
analog audio cables
Basic quality audio
1
Using an analog cable, connect the AUX
IN connector on your Blu-ray Surround
Base to the AUDIO OUT connectors on
the TV or other device.
Set up EasyLink (HDMI-CEC
control)
This Blu-ray Surround Base supports
Philips EasyLink, which uses the HDMI-CEC
(Consumer Electronics Control) protocol.
EasyLink-compliant devices that are connected
through HDMI can be controlled by a single
remote control.
Depending on the manufacturer, HDMI-CEC is known
by many names. For information on your device, see
the user manual of the device.
Philips does not guarantee 100% interoperability with
all HDMI-CEC devices.
Before you start
Enable EasyLink
1
2
3
4
VCR
Note
Connect your Blu-ray Surround Base to
the HDMI-CEC compliant device through
HDMI connection.
Make the necessary connections described
in the quick start guide, and then switch
the TV to the correct source for your Blu-
ray Surround Base .
Press .
Select [Setup], and then press OK.
Select [EasyLink] > [EasyLink] > [On] .
On your TV and other connected devices,
turn on HDMI-CEC control. For details, see
the user manual of the TV or other devices.
On your TV, set the audio output to
'Amplifier' (instead of TV speakers).
For details, see the TV user manual.
EN
11

Advertisement

Table of Contents

   Also See for Philips HTB3525B

   Related Manuals for Philips HTB3525B

   Related Content for Philips HTB3525B

Comments to this Manuals

Symbols: 0
Latest comments: