Using The Rotary Commander - Sony CDX-M9905X Operating Instructions Manual

•
SEEKIAMS
control
Rotate and release to:
- Skip tracks.
To continuously skip tracks, rotate once and
rotate again within 2 seconds and hold the
control.
- Tune in stations automatically.
Rotate, hold, and release to:
- Fast-forward/reverse a track.
- Find a station manually.
By rotating the control
By pushing in and rotating the control
Rotate the VOL control
to adjust the volume.
Using the rotary commander
You can also control the unit (and optional CD/
MD units) with a rotary commander (optional).
First, attach the appropriate label depending on
how you want to mount the rotary commander.
The rotary commander works by pressing
buttons and/or rotating controls.
By pressing buttons
(SOURCE)
Press
To
Change the source
(Radio/CDIMD*1 )/Power
on.
Push in and rotate the control to:
- Receive preset stations.
- Change discs during CD (MD) playback*1.
- Change albums*3.
(MODE)
( OFF)*2
(SEL)/( SOUND)
Change operation
(Radio band/CD unit*1lMD
unit*1).
Attenuate the sound.
Stop playback or radio
reception/Power off.
(Not available)
*
1 Only if the corresponding optional equipment is
connected.
*2 If your car has no ACC (accessory) position on the
ignition key switch, after turning off the ignition, be
sure to press and hold (
OFF)
until the display
disappears.
*3 Available only when an MP3 file is played.
continue to next page
-+
( DSPL)
Select the display mode
(This button works as the
SCREEN button).
39