Table of Contents
Advertisement
Quick Links
OPERATION MANUAL
THANK YOU FOR PURCHASING A SELECON ACCLAIM ZOOMSPOT. SELECON HAS DESIGNED THIS
LUMINAIRE TO PROVIDE YOU WITH A SUPERIOR FITTING IN PERFORMANCE, DESIGN AND
ENGINEERING AND WE ARE CONFIDENT THAT IT WILL PERFORM TO YOUR EXPECTATIONS FOR
MANY YEARS TO COME.
Unpack and check your luminaire to ensure it has been received in good order. If the luminaire is damaged,
do not install and contact your dealer
This manual will provide you with information to assist you in making maximum use of your luminaire, its
maintenance and care. If you would like further assistance please contact your Selecon dealer or Selecon.
Installation is entirely at your risk.
installation. Do not attempt installation unless you are suitably qualified. If you do not understand a
point in this manual, don't guess. Don't take short cuts. If in doubt, stop! Contact Selecon or one of
its authorised distributors for advice. Don't be afraid to ask for help.
Table of Contents:
ACCLAIM
18º-34º & 24º-44º
ZOOMSPOTS
.
Caution!
Read this manual from cover to cover before attempting
IMPORTANT
NOTE:
Before discarding the
packaging, please ensure
you have the suspension
bolt set, colour frame and
/or the lamp. The
packaging is recyclable,
please dispose of it
responsibly.
2
2
3
3
4
4
4
4
5
5
5
5
5
5
6
6
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Selecon ACCLAIM 18º–34º
Summary of Contents for Selecon ACCLAIM 18º–34º
- Page 1 Do not attempt installation unless you are suitably qualified. If you do not understand a point in this manual, don’t guess. Don’t take short cuts. If in doubt, stop! Contact Selecon or one of its authorised distributors for advice. Don’t be afraid to ask for help.
-
Page 2: Safety Warnings
Information in this manual shall not be deemed a warranty, representation or guarantee concerning a luminaires’ suitability or fitness for a specific purpose. Subject to the right to use its luminaires, Selecon does not convey any right, title or interest in its intellectual property, including, without limitation, its patents, copyrights and know-how. - Page 3 First Time Use: When using your fixture for the first time, there is a “burn in” period. Light smoke caused by the evaporation of assembly lubricants will be produced. This is a temporary effect that will cease when the lubricant has fully evaporated. Mounting your luminaire: A Safety Chain MUST always be used when rigging luminaires on bars, ladders etc.
- Page 4 Earth Test Point - located on the rear housing of the Acclaim luminaire; to test the earth - place the test probe where indicated, and perform the earth test. Acclaim Zoomspot Earth test point on the rear of the luminaire. Lamps and Lamping Procedure: Lamp base / socket = G.Y.
-
Page 5: Pattern Projection
The shutters are used to mask a portion of the beam shaping it, masking light off scenery, curtains, etc. Your Acclaim profile features an off-centre shutter blade system developed by Selecon. The larger section of the unequal blade can be moved significantly around the axis of the beam providing a very wide range of masking angles. -
Page 6: Limited Warranty
Selecon or its authorised agent. If Selecon accepts the warranty claim, Selecon will provide, or arrange for, service, repair or replacement as Selecon shall determine in its sole discretion. Selecon shall bear the cost of such service, repair or replacement. However, the owner shall bear the cost of freight and insurance on the luminaire, both ways. - Page 7 Version 4: December 2008...
Need help?
Do you have a question about the ACCLAIM 18º–34º and is the answer not in the manual?
Questions and answers