Hitachi VK-S454ER User Manual page 33

7. Fetch the signal cable, video cable and power wires from bracket. Fix the cover plate, tighten the knurled-screw (refer to Figure 6).
8. Fix the assembled Dome on the wall and tighten 4 PCS knurled-screws.
9. Connect the signal cable of the system as Figure 8.
10 Connect alarm input and alarm output according to instructions of socket D3.(Figure 9)
4 channels Normal Open (NC) alarm input, close contact to trigger alarm.
1 pair of alarm out put: Normal Open and Normal Close.
Once the system receive alarm input signal, dome will no delay work as program setting, to achieve startup PTZ and
Camera, shift the video of alarmed region to monitor, adjust the place of alarm region, monitor the preset. Response the
situation of alarming region really and quickly.
Figure 7
Figure 8
High Speed Dome Camera User's Manual
- 33 -