Philips Saeco Intelia evo HD8751 User Manual page 39

2 Remove the Pannarello from the hot water/steam wand.
3 Remove the "INTENZA+" water fi lter from the water tank if it was instal-
led.
4
Press the " " button. Press the "
display is shown.
5 Press the " " button to enter the descaling menu.
Note:
If you press the " " button by mistake, press the "
6 Remove the water tank and pour the entire content of the Saeco decal-
cifi er. Then fi ll the water tank with fresh water up to the MAX level.
7
Place the water tank back into the machine.
8
Place a large container (1.5L) under both the steam/hot water wand
and the dispensing spout.
ENGLISH ENGLISH
" button until the following
" button to quit.
37 37