Download Print this page

Fujitsu Wall Mounted Type Installation Manual: Connecting Cable To Control Board Connector; Front Panel, Control Box Cover And Display Case Installation

Air conditioner outdoor unit.
Hide thumbs

Advertisement

] 1
12.5. Connecting cable to control board
connector
(1) Pass the cable from the hole in the back of indoor unit.
(2) Connect the cable to the control board connector.
(3) Hook the cable to the rib.
connect the cable
PCB
rib
Option type
Wired remote controller
Simple remote contoroller
External input
External output
(4) Use cable clamper and screw to fasten the cable of wired
remote controller.
cable
clamper
screw
screw
conduit holder
hole
CN14
CN16
CN6
Connector No
CN6
CN14
CN16
cable clamper
cable of wired
remote controller
original wire of control unit
(5) Fix the binder clamp with the screw and bind the wire of
external kit with the binder.
binder clamp
screw
binder
external connect wire
conduit holder
external connect wire
] 1
12.6. Front panel, control box cover and
display case installation
Install front panel, control box cover and display case by the
reverse procedures as stated in 12.4 Front panel, control box
cover and display case removal.
screw
binder clamp
original wire of
control box
En-13

Advertisement

   Related Manuals for Fujitsu Wall Mounted Type

Comments to this Manuals

Symbols: 0
Latest comments:
  • Danny ancalade Sep 16, 2018 11:18:
    My green light is blinking 10 times and orange is blinking 1 with code A1 can you tell me how to repair it
  • yorick Aug 22, 2017 01:58:
    fujitsu asya18blac​m
    red light +orange blinking twice together and then red light blink once alone
  • panya Dec 18, 2015 11:37:
    Fujitsu model: ASAG09LJCA​
    Green light operation :9time flash
    Oran​ge light timer :9time flash
    Gree​n light economy :rapid flash
    What error code? How to solve this problem.
    T​hank.