Switch 208/224 Description
The HP AdvanceStack Switch 208T and 224T are high-speed, multiport
switches that can be used to build switched networks with both Ethernet/
IEEE 802.3 and 100Base-T devices, including computers, servers, and printers,
as well as other network infrastructure devices: hubs, bridges, other switches,
This chapter describes your HP AdvanceStack Switch 208T and 224T
The features of the Switch 208T and 224T include:
Front and back of the switches
All ports are enabled -- just connect the network cables to active network
devices and your switched network is operational.
Network addresses are automatically learned and stored in the switches
8000-address forwarding table.
All network ports (fixed and transceiver) operate in half-duplex mode at
the speed indicated on the switch labeling, either 10 Mbit/s or 100 Mbit/s.