Installing Transceivers - HP J3175A Installation And Reference Manual

Hewlett-packard advancestack switch installation and reference guide
Table of Contents

Advertisement

N o t e
An expansion slot module uses the switch port 1 circuitry to communicate
with the other switch ports. Therefore, installing an expansion module
disables port 1 as reflected by the LED

Installing Transceivers

Install either of these HP 100Base-T transceiver modules into the transceiver
slot:
- HP J3192B 100Base-TX Twisted-Pair Transceiver Module
- HP J3193B 100Base-FX Fiber-Optic Transceiver Module
C a u t i o n s
Make sure you install only the "B" model or later versions of these
100Base-T transceiver modules into the Switch 208/224.
Do not install any 100VG transceiver modules in this slot.
Expansion Slot
supported expansion module
Blue color bar with "100T" in it,
and "B", or later, model number
identifies a correct transceiver
for the Switch 208T and 224T
Installing the Switch 208/224
Installation Steps
Back of Switch
on the front of the switch.
1-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

J3177aAdvancestack 208Advancestack 224Advancestack switch 208Advancestack switch 224J3175a

Table of Contents