Connecting The Antenna - RCA ANT1450 User Manual

Connecting the Antenna

You can use the antenna with or without its amplifi er, depending on which connection gives
you the best signal. Try using the amplifi er fi rst. If you notice that you've lost channels that
you normally receive, try connecting without the amplifi er.
You can connect the antenna directly to your TV or use it with a converter box.
Built-In
Coaxial Cable
Amplifier
Insert
Built-In
Coaxial Cable
ANT1450
antenna
2
ANTENNA
TV/STB
3 4
TV
5
ANT1450
antenna
2
TV
3
To connect the antenna with the
amplifi er directly to your TV:
1. Make sure your TV is turned off.
2. Connect the antenna built-in cable to
the input jack of the amplifi er.
3. Connect the amplifi er's built-in cable to
the antenna input on your TV.
4. Plug the amplifi er's power cord into an
electrical outlet.
Important: This power unit is intended to be
correctly oriented in a vertical or fl oor mount
position.
5. Re-scan for channels on your TV.
To connect the antenna without the
amplifi er directly to your TV:
1. Make sure your TV is turned off.
2. Connect the antenna's built-in coaxial
cable to the antenna input on your TV.
3. Re-scan for channels on your TV.
4