Advertisement
Quick Links
Before discarding the packaging, please ensure you have the suspension bolt set, colour frame and /or the lamp. The packaging is
THANK YOU FOR PURCHASING A PHILIPS SELECON ACCLAIM ZOOMSPOT. PHILIPS SELECON HAS
DESIGNED THIS LUMINAIRE TO PROVIDE YOU WITH A SUPERIOR FITTING IN PERFORMANCE,
DESIGN AND ENGINEERING AND WE ARE CONFIDENT THAT IT WILL PERFORM TO YOUR
EXPECTATIONS FOR MANY YEARS TO COME.
Unpack and check your luminaire to ensure it has been received in good order. If the luminaire is damaged,
do not install and contact your dealer
This manual will provide you with information to assist you in making maximum use of your luminaire, its
maintenance and care. If you would like further assistance please contact your Philips Selecon dealer or
Philips Selecon.
Installation is entirely at your risk.
installation. Do not attempt installation unless you are suitably qualified. If you do not understand a
point in this manual, don't guess. Don't take short cuts. If in doubt, stop! Contact Philips Selecon or
one of its authorised distributors for advice. Don't be afraid to ask for help.
Table of Contents:
Philips Selecon Distributor Network - www.seleconlight.com/distributors
ACCLAIM
18º-34º & 24º-44º
ZOOMSPOTS
Operation Manual
IMPORTANT NOTE:
recyclable, please dispose of it responsibly.
.
Caution!
Read this manual from cover to cover before attempting
2
2
3
3
4
4
4
4
5
5
5
5
5
5
6
6
1
Advertisement
Related Manuals for Philips Selecon Acclaim
Summary of Contents for Philips Selecon Acclaim
-
Page 1: Table Of Contents
Do not attempt installation unless you are suitably qualified. If you do not understand a point in this manual, don’t guess. Don’t take short cuts. If in doubt, stop! Contact Philips Selecon or one of its authorised distributors for advice. Don’t be afraid to ask for help. -
Page 2: Important
Philips Selecon used all due care in preparing this manual. However, Philips Selecon accepts no liability for errors or omissions. Philips Selecon reserves the right to change the specifications of its luminaires, or the information in this manual, without necessarily giving its customers notice thereof. -
Page 3: First Time Use
First Time Use: When using your fixture for the first time, there is a “burn in” period. Light smoke caused by the evaporation of assembly lubricants will be produced. This is a temporary effect that will cease when the lubricant has fully evaporated. Mounting your luminaire: A Safety Chain MUST always be used when rigging luminaires on bars, ladders etc. -
Page 4: Earth Test Point
Earth Test Point - located on the rear housing of the Acclaim luminaire; to test the earth - place the test probe where indicated, and perform the earth test. Acclaim Zoomspot Earth test point on the rear of the luminaire. Lamps and Lamping Procedure: Lamp base / socket = G.Y. -
Page 5: Shutter System
Consult your Philips Selecon distributor for assistance. Only replace with damaged parts with authorised Philips Selecon spares. N.B. Luminaire cables – your Philips Selecon luminaire is fitted with special heat resistant flexible cable, replace with genuine Philips Selecon spare part cable kit only – refer to your Philips Selecon distributor. (Replacement cables are... -
Page 6: Limited Warranty
However, the owner shall bear the cost of freight and insurance on the luminaire, both ways. If Philips Selecon does not wish to service, repair or replace the defective luminaire, it shall refund the purchase price. Philips Selecon‟s sole responsibility is to repair, replace or service a luminaire subject to a valid warranty claim. Under no circumstance will Philips Selecon be liable for direct, indirect, incidental, special or consequential costs or damages, including dismantling and re-installation costs, loss of operations or profits, to the maximum extent permitted by law. -
Page 7: Version 5: September 2010
Version 5: September 2010...