HP TC4100 Operation And Maintenance Manual page 55

Tower server
Hide thumbs Also See for TC4100:
Table of Contents

Advertisement

Chapter 3
12. Secure the PCI board as shown in
13. If the installed accessory board requires an external connection or a connection to the System board, ensure
that the cable is properly attached.
Refer to the accessory board documentation for connection requirements.
14. If accessory board installation is complete, re-assemble the Server.
15. If all installation work is complete, return power to the Server according to the respective NOS power up
instructions.
16. Use the respective NOS software to ensure the correct software drivers for the PCI board are loaded and
verify correct operation.
Figure
3-22.
Screw
1
2
Figure 3-22. Installing the Accessory Board
Installing and Configuring
PCI Card
(optional)
53

Advertisement

Table of Contents
loading

Table of Contents