Front panel LEDs and buttons
Item
Description
1
UID LED button
2
Internal health LED
3
External health LED (power
supply)
4
NIC 1 link/activity LED
5
NIC 2 link/activity LED
6
Power On/Standby
button/system power LED
Status
Blue = Activated
Flashing = System being remotely managed
Off = Deactivated
Green = Normal
Amber = System degraded. To identify component in degraded
state, refer to Systems Insight Display LEDs.
Red = System critical. To identify component in critical state, refer
to Systems Insight Display LEDs.
Green = Normal
Amber = Power redundancy failure. To identify component in
degraded state, refer to Systems Insight Display LEDs.
Red = Critical power supply failure. To identify component in
critical state, refer to Systems Insight Display LEDs.
Green = Network link
Flashing = Network link and activity
Off = No link to network. If power is off, view the rear panel
RJ45 LEDs for status.
Green = Network link
Flashing = Network link and activity
Off = No link to network. If power is off, view the rear panel
RJ45 LEDs for status.
Green = System on
Amber = System shut down, but power still applied
Off = Power cord not attached or power supply failure
Component identification 8