Required Tools - X-TREME XB-300SLA Owner's Manual

Your new bicycle was partially assembled in the factory and then partially disassembled for shipping. You may have purchased the bicycle already
fully assembled and ready to ride OR in the shipping carton in the partially disassembled form. The following instructions will enable you to prepare
your bicycle for years of enjoyable cycling. For more details on inspection, lubrication, maintenance and adjustment of any area please refer to the
relevant sections in this manual. If you have questions about your ability to properly assemble this unit, please consult a qualified bicycle service
specialist before riding.
To avoid injury, this product must be properly assembled before use. if your bicycle was obtained assembled, we strongly recommend
!
that you review the complete assembly instruction.
TYPICAL TOOLS REQUIRED:
• Phillips head screw driver
• 2.5mm, 3mm, 4mm, 5mm 6mm & 8mm Allen keys
• Adjustable wrench or a 8mm, 9mm, 10mm, 13mm, 14mm,
15mm & 17mm open/box end wrenches
• A pair of pliers with cable cutting ability
5