Honda 2009 Ridgeline Owner's Manual page 167
Unlinked
Hide thumbs
Also See for 2009 Ridgeline:
- Owner's manual (427 pages) ,
- Owner's manual (149 pages) ,
- Owner's manual (427 pages)
Table of Contents
Advertisement
To Play the AM/FM Radio
The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
PWR button or the AM/FM button.
Adjust the volume by turning the
volume knob.
On models with navigation system
Pushing the AUDIO button will also
turn on the system (see page
The band and frequency that the
radio was last tuned to are displayed.
To change bands, press the AM/FM
button. On the FM band, ST will be
displayed if the station is
broadcasting in stereo. Stereo
reproduction in AM is not available.
On the AM band, AM noise
reduction turns on automatically.
To Select a Station
You can use any of five methods to
find radio stations on the selected
band: tune, seek, scan, the preset
bars, and auto select.
Use the TUNE bar to tune
TUNE
the radio to a desired frequency.
Press the
side of the bar to tune
to a higher frequency, and press the
163
).
side to tune to a lower
frequency.
SEEK
The SEEK function
searches up and down from the
current frequency to find a station
with a strong signal. To activate it,
press the
or
SEEK/SKIP bar, then release it.
SCAN
The scan function samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
The system will scan for a station
Playing the AM/FM Radio
with a strong signal. When it finds
one, it will stop and play that station
for about 10 seconds.
If you do nothing, the system will
scan for the next strong station and
play it for 10 seconds. When it plays
a station that you want to listen to,
press the SCAN button again.
Preset
Each side of the bars (1
6) can store one frequency on AM
and two frequencies on FM.
1.
Select the desired band, AM or
FM. FM1 and FM2 let you store
six stations each.
2.
Use the tune, seek, or scan
side of the
function to tune the radio to a
desired station.
3.
Pick a preset number (1 6), and
hold it until you hear a beep.
4.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
161
Advertisement
Chapters
Table of Contents
