10 Configuring the HP NetServer
This chapter supports setting up software on your HP NetServer LC 2000/2000r.
You may choose to do this before or after you install the NetServer in the rack.
For more information on the overall process, see Chapter 1 of this manual and
refer to the HP Rack Installation Road Map.
HP NetServer Navigator CD-ROM
The HP NetServer Navigator CD-ROM provides you with two choices for running
the CD-ROM and accessing its configuration information and utilities.
l Run the Navigator CD-ROM on the HP NetServer to obtain the required
configuration information and set up the NetServer.
You need to the run the Navigator CD-ROM on the NetServer to install the
NOS and all the bundled drivers and utilities. Refer to the following topics
for the contents of Navigator's Main Menu when used on the NetServer.
l Run the Navigator CD-ROM on any Windows PC after setting up the HP
NetServer to obtain the required configuration information.
Refer to "Running the Navigator CD-ROM on a Windows PC" later in the
chapter for more information.
Contents of the Navigator CD-ROM – HP NetServer
The Main Menu directs you to modules where you can perform configuration
tasks or create the diskettes required for installation including the Utilities. The
Information Assistant button directs you to the HP NetServer Online
Documentation CD-ROM. The menu buttons are:
Configuration Assistant and Installation Assistant
HP Management Solutions
l Information Assistant (directs you to the HP NetServer Online