before using your Kenwood
before plugging in
Make sure your electricity supply is
Read these instructions carefully and
the same as the one shown on the
retain for future reference.
rear of your handmixer.
Remove all packaging and any
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
Ensure the cord is fully unwound
for contact with food.
before using the handmixer.
before using your handmixer
Never put the handmixer body in
for the first time
water or let the cord or plug get wet.
Wash the parts (see 'cleaning').
Keep fingers, hair, clothing and
utensils away from moving parts.
Never let the cord touch hot
surfaces or hang down where a
child could grab it.
HM520 - 3 speed
Never use a damaged handmixer.
HM530 - 5 speed
Get it checked or repaired: see
tool release button
'service and customer care'.
Never use an unauthorised
kneader with collar (if supplied)
kneader without collar (if supplied)
Always unplug the appliance when
not in use, before fitting or removing
parts or before cleaning.
This appliance is not intended for
to use your handmixer
use by persons (including children)
with reduced physical, sensory or
1 Unwrap the cord and make sure the
mental capabilities, or lack of
experience and knowledge, unless
position. Ensure the tool storage
they have been given supervision or
has been removed.
instruction concerning use of the
2 Insert the beaters or kneaders
appliance by a person responsible
turn and push until a positive click is
for their safety.
Children should be supervised to
Important: The kneader with the
ensure that they do not play with the
Only use the appliance for its
3 Plug in.
intended domestic use. Kenwood
4 With the ingredients in a bowl of an
will not accept any liability if the
appropriate size, place the
appliance is subject to improper use,
beaters/kneaders into the bowl.
or failure to comply with these
5 Pull the speed switch backwards to
reach the desired speed (the first dot
on the handmixer body is the
slowest speed setting). Line up the
dot on the side of the speed switch
with the corresponding speed.
As the mixture thickens, increase the
is in the off "O"
will only fit into the larger