Download  Print this page

Electrical Adjustmens - Sony D-EJ100 Service Manual

Hide thumbs

Advertisement

ELECTRICAL ADJUSTMENTS
The CD section adjustments are done automatically in this set.
Precautions for Check
1. Perform check in the order given.
2. Use YEDS-18 disc (Part No.: 3-702-101-01) unless otherwise
indicated.
3. Power supply voltage requirement :DC4.5 V in DC IN jack.
(J401)
VOLUME button : Minimum
HOLD switch : OFF
SECTION 4
Focus bias Check
Condition:
• Hold the set in horizontal state.
Connection:
oscilloscope
(AC range)
TP601(RF)
[MAIN BOARD] (SIDE B)
CN601
15
TP601
(RF)
R103 R603
4
C104
1
Procedure:
1. Connect the oscilloscope to the test point TP601(RF) on the
MAIN board.
2. Set a disc. (YEDS-18)
3. Press the u button.
4. Check the oscilloscope waveform is as shown below.
A good eye pattern means that the diamond shape ( ) in the
center of the waveform can be clearly distinguished.
RF Signal reference Waveform (Eye Pattern)
VOLT/DIV : 100 mV (With the 10 : 1 probe in use)
TIME/DIV : 500ns
RF level
0.4 to 0.8 Vp-p
To watch the eye pattern, set the oscilloscope to AC range and
increase the vertical sensitivity of the oscilloscope for easy
watch-ing.
5. Stop revolving of the disc motor by pressing the x button.
7
7
D-EJ100/EJ101/EJ101CK/EJ106CK

Advertisement

Table of Contents

   Related Manuals for Sony D-EJ100

This manual is also suitable for:

D-ej101D-ej106ckD-ej101ck

Comments to this Manuals

Symbols: 0
Latest comments: