Manual Preset Memory - Panasonic CQ-C5403W Operating Instructions Manual

Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM band selections.
Note:
¡ New stations overwrite existing saved stations after these procedures.
Warning
¡To ensure safety, never attempt to preset stations while you are driving.
Auto Preset Memory (APM)
With this operation, stations with good receiving condi-
tions can be automatically stored in the preset memory.
q Select a band. (
Previous page)
a
w Press and hold [BAND] (APM) for more than 2 sec-
onds.
6 stations with first to 6th highest in signal strength will
be preset to each band.
Once set, the preset stations are sequentially scanned
for 5 seconds each. (scanning)
Note:
¡ To stop scanning, press one of the buttons from [1] to
[6].
q Select a band. (
a Previous page)
w Press one of the preset buttons from [1] to [6].
Station Preset

Manual Preset Memory

With this operation, a station can be manually stored in the
preset memory.
q Select a band and frequency. (
w Press and hold one of the preset buttons from [1] to [6]
Preset Station Calling
until the display blinks once.
Preset number
CQ-C5403W/C5303W
Previous page)
a
E
N
G
L
I
S
H
1
12
13