Clock Functions - Electrolux EOA6841 User Manual

Electrolux eoa6841 steam oven user manual  
Hide thumbs Also See for EOA6841:
Table of Contents

Advertisement

Available languages

Available languages

onds. You will see the heat-up indicator
alternates.
6.11 Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
6.12 Energy saving
The appliance contains fea-
tures which help you save en-
ergy during everyday cooking:
• Residual heat:
– When the heating function or pro-
gramme operates, the heating ele-

7. CLOCK FUNCTIONS

7.1 Clock functions
Symbol
If you set the time for a clock function, the
time starts to count down after 5 sec-
onds.
If you use the clock functions Du-
ration
the appliance deactivates the
heating elements after 90 % of the
set time. The appliance uses the
residual heat to continue the
cooking procedure until the time
ends (3 - 20 minutes).
Setting the clock functions
1.
Set a heating function.
2.
Press
display shows the necessary clock
function and the related symbol.
Function
To set a countdown (max 2 h 30 min). This function
has no effect on the operation of the appliance. You
Minute Minder
can also activate it when the appliance is off. Use
to activate the function. Press
minutes and OK to start.
To set how long the appliance has to be in opera-
Duration
tion (max. 23 h 59 min).
To set the switch-off time for a heating function
End Time
(max. 23 h 59 min).
and End Time
again and again until the
ments are deactivated 10 % earlier
(the lamp and fan continue to oper-
ate). For this feature to operate, the
cooking time must be longer than 30
minutes or you must use the clock
functions ( Duration , End Time ).
– When the appliance is off, you can
use the heat to keep food warm. The
display shows the remaining temper-
ature.
• Cooking with the lamp off - Touch
and hold
the lamp during cooking.
• Eco functions - refer to " Heating
Functions ".
Description
3.
Press
time. Press OK to confirm.
When the time ends, an acoustic sig-
nal sounds. The appliance deacti-
vates. The display shows a message.
,
4.
Press a sensor field to stop the signal.
ENGLISH
for 3 seconds to deactivate
or
to set the
or
to set the necessary
13

Advertisement

Table of Contents
loading

Table of Contents