Air Cleaner Housing Removal
Remove the shroud (see Shroud Removal in the Frame
Loosen the clamp screw [A] and pull out the air cleaner
duct [B] from the carburetor.
Remove the air cleaner housing mounting bolts [A].
Remove the air cleaner housing [B].
Air Cleaner Housing Installation
Installation is the reverse of removal.
Install the intake portion [A] of the air cleaner housing into
the frame hole [B].
Air Cleaner Element Removal
Shroud (see Shroud Removal in the Frame chapter)
Air Cleaner Cover [B]
Pull out the element [A].
Stuff a clean, lint-free cloth into the air cleaner housing so
no dirt is allowed to enter the carburetor.
Wipe out the inside of the air cleaner housing with a clean
Check inside of the inlet tract and carburetor for
dirt. If dirt is present, clean the inlet tract and car-
buretor thoroughly. You may also need to replace
the element and seal the housing and inlet tract.
FUEL SYSTEM 3-19