Download  Print this page

Frame; Frame Inspection; Sidestand Inspection; Electrical System - Kawasaki KLX110 Service Manual

Hide thumbs


Table of Contents
Periodic Maintenance Procedures


Frame Inspection

Clean the frame with steam cleaner.
Visually inspect the frame [A] for cracks, dents, bending,
or warp.
If there is any damage to the frame, replace it.
A repaired frame may fail in use, possibly causing
an accident resulting in injury or death. If the frame
is bent, dented, cracked, or warped, replace it.

Sidestand Inspection

See if the sidestand [A] moves smoothly and retracts fully.
If not, clean and grease the pivot [B] and sliding portion
Check the sidestand spring [D] for damage.
If necessary, replace the spring.

Electrical System

Spark Plug Cleaning and Inspection

Remove the spark plug cap [A].
Remove the spark plug [B], using the spark plug wrench
Special Tool - Spark Plug Wrench: 57001-1262
Owner's Tool - Spark Plug Wrench, 16 mm: 92110-1206
The plug may also be cleaned using high flash-point sol-
vent and a nonmetal brush (nylon etc.).
If the spark plug electrodes are corroded or damaged or
if the insulator is cracked, replace the plug. Use the stan-
dard spark plug.


Table of Contents

   Also See for Kawasaki KLX110

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: