Download  Print this page

Swingarm Pivot Inspection; Steering; Steering Inspection; Steering Adjustment - Kawasaki KLX110 Service Manual

Motorcycle.
Hide thumbs

Advertisement

Table of Contents
2-34 PERIODIC MAINTENANCE
Periodic Maintenance Procedures

Swingarm Pivot Inspection

Raise the rear wheel off the ground with the jack.
Special Tool - Jack: 57001-1238
Move the swingarm [A] side to side to check for worn,
damaged or loose suspension pivot components.
If any play is detected, check for looseness of swingarm
pivot shaft nut or for damage to the swingarm rubber
bushings.

Steering

Steering Inspection

Raise the front wheel off the ground with the jack.
Special Tool - Jack: 57001-1238
With the front wheel pointing straight ahead, alternately
nudge each end of the handlebar. The front wheel should
swing fully left and right from the force of gravity until the
fork hits the stop.
If the steering binds or catches before the stop, check the
routing of the cables, hoses and harnesses.
If the steering feels tight, adjust or lubricate the steering.
Feel for steering looseness by pushing and pulling the
forks.
If you feel looseness, adjust the steering.

Steering Adjustment

Raise the front wheel off the ground with the jack.
Special Tool - Jack: 57001-1238
Remove:
Number Plate (see Number Plate Removal in the Frame
chapter)
Handlebar Holder Bolts [A]
Handlebar Holders [B]
Handlebar [C] (from holder)

Advertisement

Table of Contents

   Also See for Kawasaki KLX110

This manual is also suitable for:

Klx110l

Comments to this Manuals

Symbols: 0
Latest comments: