Download  Print this page

Wheel/tires; Tire Air Pressure Inspection - Kawasaki KLX110 Service Manual

Motorcycle.
Hide thumbs

Advertisement

Table of Contents
Periodic Maintenance Procedures
Replace the oil filter [A] with a new one.
Apply engine oil to the grommet [B].
Be sure to install the filter with the grommet facing inside.
Inside out installation stops oil flow, causing engine
seizure.
Replace the O-ring [A] with a new one.
Apply grease to the O-ring.
Install the spring [B] securely.
Install the oil filter cap.
Torque - Oil Filter Cap Bolt: 5.2 N·m (0.53 kgf·m, 46 in·lb)
Install the engine guard (see Engine Guard Removal/In-
stallation in the Frame chapter).
Pour in the specified type and amount of oil (see Engine
Oil Change).

Wheel/Tires

Tire Air Pressure Inspection

Remove the air valve cap.
Measure the tire air pressure with an air pressure gauge
[A] when the tires are cold (that is, when the motorcycle
has not been ridden more than a mile during the past 3
hours).
Install the air valve cap.
Adjust the tire air pressure according to the specifications
if necessary.
Air Pressure (when Cold)
Front
100 kPa (1.0 kgf/cm², 14 psi)
Rear
100 kPa (1.0 kgf/cm², 14 psi)
NOTICE
PERIODIC MAINTENANCE 2-21

Advertisement

Table of Contents

   Also See for Kawasaki KLX110

This manual is also suitable for:

Klx110l

Comments to this Manuals

Symbols: 0
Latest comments: