Download  Print this page

Friction And Steel Plates Inspection; Engine Lubrication System; Engine Oil Change - Kawasaki KLX110 Service Manual

Motorcycle.
Hide thumbs

Advertisement

Table of Contents
Periodic Maintenance Procedures

Friction and Steel Plates Inspection

Remove the clutch plates (see Secondary Clutch
Disassembly (KLX110C) or Clutch Hub Disassembly
(KLX110D) in the Clutch chapter).
Visually inspect the friction and steel plates to see if they
show any signs of seizure, or uneven wear.
If any plates show signs of damage, replace the friction
plates and steel plates as a set.
Measure the thickness of the friction plates [A] with vernier
calipers.
[B] KLX110C
[C] KLX110D
If they have worn past the service limit, replace them with
new ones.
Friction Plate Thickness
Standard:
KLX110C
KLX110D
Service Limit:
Place each friction plate or steel plate on a surface plate,
and measure the gap between the surface plate [A] and
each friction plate or steel plate [B] with a thickness gauge
[C]. The gap is the amount of friction or steel plate warp.
If any plate is warped over the service limit, replace it with
a new one.
Friction Plate Warp
Standard:
KLX110C
0.2 mm (0.008 in.) or less
KLX110D
0.15 mm (0.0059 in.) or less
Service Limit:
0.3 mm (0.01 in.)
Steel Plate Warp
Standard:
0.15 mm (0.0059 in.) or less
Service Limit:
0.3 mm (0.01 in.)

Engine Lubrication System

Engine Oil Change

Warm up the engine thoroughly so that the oil will pick up
any sediment and drain easily. Then stop the engine.
3.1 ∼ 3.3 mm
(0.12 ∼ 0.13 in.)
3.12 ∼ 3.28 mm
(0.123 ∼ 0.129 in.)
3.0 mm (0.12 in.)
PERIODIC MAINTENANCE 2-19

Advertisement

Table of Contents

   Also See for Kawasaki KLX110

This manual is also suitable for:

Klx110l

Comments to this Manuals

Symbols: 0
Latest comments: