Download  Print this page

Advertisement

Charging System
With the Kawasaki hand tester, measure the internal re-
sistance in both directions between the terminals.
Special Tool - Hand Tester: 57001-1394
If the reading is not the specified value, replace the reg-
ulator/rectifier.
Internal Resistance @20°C (68°F)
Terminal
(–)*
A
B
C
(–)*: Tester (–) Lead
Use only Hand Tester 57001-1394 for this test. An
ohmmeter other than the Hand Tester may show
different readings. If a megger or a meter with a
large-capacity battery is used, the regulator will be
damaged.
Connect the regulator/rectifier lead connector and install
the rubber cover [A] over the connector.
Tighten:
Torque - Regulator Mounting Screw [B]: 5.2 N·m (0.53
kgf·m, 46 in·lb)
Tester (+) Lead
A
B
6.9 ∼ 70
NOTICE
ELECTRICAL SYSTEM 15-25
Unit: kΩ
C

Advertisement

Table of Contents

   Also See for Kawasaki KLX110

This manual is also suitable for:

Klx110l

Comments to this Manuals

Symbols: 0
Latest comments: