Download  Print this page

Sidestand; Sidestand Removal; Sidestand Installation - Kawasaki KLX110 Service Manual

Motorcycle.
Hide thumbs

Advertisement

Table of Contents

Sidestand

Sidestand Removal

Raise the rear wheel off the ground with the jack.
Special Tool - Jack: 57001-1238
Remove:
Spring [A]
Sidestand Bolt [B]
Sidestand Nut [C]
Sidestand [D]

Sidestand Installation

Apply grease to the sliding area [A] of the sidestand [B].
Replace the sidestand nut [D] with a new one.
Tighten the sidestand bolt [C] and nut.
Torque - Sidestand Bolt: 9.8 N·m (1.0 kgf·m, 87 in·lb)
Sidestand Nut: 29 N·m (3.0 kgf·m, 21 ft·lb)
Hook the spring [E] so that the longer spring end faces
upward.
FRAME 14-15

Advertisement

Table of Contents

   Also See for Kawasaki KLX110

This manual is also suitable for:

Klx110l

Comments to this Manuals

Symbols: 0
Latest comments: