Download  Print this page

Footpegs And Bracket; Footpeg Removal/installation; Footpeg Bracket Removal; Footpeg Bracket Installation - Kawasaki KLX110 Service Manual

Motorcycle.
Hide thumbs

Advertisement

Table of Contents
14-14 FRAME

Footpegs and Bracket

Footpeg Removal/Installation

Remove:
Cotter pin [A]
Pivot Pin [B]
Spring [C]
Footpeg [D]
Installation is reverse of removal; note the following.
Replace the cotter pin with a new one.
Apply grease to the sliding area of the footpeg.
Bend the longer side of the cotter pin.

Footpeg Bracket Removal

Remove the engine guard (see Engine Guard Re-
moval/Installation).
Place the jack under the frame to support the motorcycle.
Special Tool - Jack: 57001-1238
Remove the bolts [A] with spring washers.
Remove the footpeg bracket [B] together with the foot-
pegs and the sidestand.

Footpeg Bracket Installation

Installation is the reverse of removal.
Tighten:
Torque - Footpeg Bracket Bolts [A]: 25 N·m (2.5 kgf·m, 18
ft·lb)

Advertisement

Table of Contents

   Also See for Kawasaki KLX110

This manual is also suitable for:

Klx110l

Comments to this Manuals

Symbols: 0
Latest comments: